Saka Indonesia Pangkah needed to drill an S-type well offshore Indonesia in a difficult environment. The well (UPB-12) was planned to be the first S-type well to drill to 9,618-ft TVD (Ngimbang carbonate formation) with a 61° inclination in Ujung Pangkah field. It was also going to be the field's deepest well—nearly double the depth at TD. However, the drilling environment posed high erratic torque and stick/slip risks.
蘑菇传媒 used the PowerDrive vorteX™ powered rotary steerable system, comprising a PowerDrive Xceed™ ruggedized rotary steerable system, and a PowerPak™ steerable motors to mitigate known risks while improving ROP.
We increased ROP by 130% compared with ROP of previous runs and 154% compared with the well plan and we improved drilling efficiency, nearly doubling feet per circulating hour.
蘑菇传媒 suggested using the PowerDrive vorteX system to mitigate these risks while improving ROP and reducing the friction factor. The PowerDrive vorteX system is made up of a PowerDrive Xceed RSS and a PowerPak motor and is extremely reliable in abrasive, hot, and high-shock environments.
Saka Indonesia Pangkah planned to use the PowerDrive vorteX system, combined with a customized PDC bit as torque risk prevention, to drill the 8½-in section of the well. The plan entailed dropping the angle from 43° at 7,944-ft MD (5,685-ft TVD) to vertical with a 2.6° dogleg severity until planned TD at 11,900-ft MD (9,618-ft TVD).
Drilling torque ranged from 5,000 to 7,000 ft.lbf with a consistent WOB throughout the process. The stick/slip ratio was reduced to a maximum of 100%, which enables the operator to mitigate stick/slip even when using a more aggressive bit. The average friction factor during rotation was reduced by 18% from 0.28 to 0.23.
By using the PowerDrive vorteX system, Saka Indonesia Pangkah was able to increase ROP by 130% compared with ROP from a standalone BHA and 154% compared with the well plan. The PowerDrive vorteX system significantly improved drilling efficiency, saving rig time and reducing overall cost.
